LEGRAND Raritan PX3-3000 Series, User Manual

Page: 458 / 977

Chapter 6: Using the Web Interface
437
Field/setting Data specified
Rule name Send SNMP notifications for PDU
(192.168.84.95) inaccessibility
Event Choose Server Monitoring > 192.168.84.95
> Unreachable
Trigger condition Select the Unreachable radio button
This will make the PX3 react only when the target PDU becomes
inaccessible.
5. Select the System SNMP Notification Action.
Note: If you have not configured the System SNMP Notification Action to
specify the SNMP destination(s), see
Editing or Deleting a Rule/Action
(on page 411).
Front Panel Settings
You can set up the default mode of the front panel display, and front
panel functions for outlet switching, actuator control, beeper mute or
RCM self-test.
Note that available front panel settings are model dependent.

Outlet switching -- available on outlet-switching capable models
only.

Actuator control -- available on all models.

Internal beeper's mute function -- available on all PX3 models

Default front panel mode setup -- available on all models, except for
the PX3-3000 series, which does NOT provide inlet sensor
information.

RCM self-test -- available on those PX3 models which support
residual current monitoring. See
PX3 Models with Residual
Current Monitoring
(on page 796).
To configure the front panel settings:
1. Choose Device Settings > Front Panel.
2. Configure the following:

To configure the default view of the LCD display, select one mode
below.
Note: The default view is shown in the automatic mode. See
Automatic and Manual Modes
(on page 95).