Chapter 6: Using the Web Interface
385
3.
In the Available LHX/SHX field, select the desired SHX-30 device one
by one, or click Select All.
4.
To remove any SHX-30 device from the Selected LHX/SHX field, click
that device's
or click Deselect All.
Send Email
You can configure emails to be sent when an event occurs and can
customize the message.
Messages consist of a combination of free text and PX3 placeholders.
The placeholders represent information which is pulled from the PX3
and inserted into the message.
For example:
[USERNAME] logged into the device on [TIMESTAMP]
translates to
Mary logged into the device on 2012-January-30 21:00
For a list and definition of available variables, see
Placeholders for
Custom Messages
(on page 407).
Operation:
1.
Choose Device Settings > Event Rules >
.
2.
Select 'Send email' from the Action list.
3.
In the 'Recipient email addresses' field, specify the email address(es)
of the recipient(s). Use a comma to separate multiple email
addresses.
4.
By default, the SMTP server specified on the SMTP Server page will
be the SMTP server for performing this action.
To use a different SMTP server, select the 'Use custom settings'
radio button. The fields for customized SMTP settings appear. For
information on each field, see
Configuring SMTP Settings
(on page
Default messages are sent based on the event. For a list of default
log messages and events that trigger them, see
Default Log
Messages
(on page 360).
5.
If needed, you can customize the subject and messages sent via this
email.
Select the 'Custom subject' checkbox, and enter the text you
prefer as this email's subject.
Select the 'Use custom log message' checkbox, and then create a
custom message up to 1024 characters in the provided field.
Summary of Contents for Raritan PX3-3000 Series
