LEGRAND Raritan PX3-3000 Series, User Manual

Page: 951 / 977

930
The PX3 can work with certain Raritan or third-party products to provide
diverse power solutions.
In This Chapter
Dominion KX II / III Configuration............................................................ 929
Dominion KSX II, SX or SX II Configuration ............................................. 934
Power IQ Configuration ........................................................................... 939
dcTrack .................................................................................................... 940
Dominion KX II / III Configuration
Raritan PX2, PX3 or PX3TS series can be connected to the Raritan's
Dominion KX II or KX III device (a digital KVM switch) to provide one more
alternative of power management.
Note that this integration requires the following firmware versions:

Dominion KX II -- 2.4 or later

Dominion KX III -- ALL versions

PX2 series -- 2.2 or later

PX3 series -- 2.5.10 or later

PX3TS series -- 2.6.1 or later
Dominion KX II or KX III integration requires D2CIM-PWR and straight
CAT5 cable.
For more information on KX II / III, refer to:

KX II or KX III User Guide on the Support page
(
)

KX II or KX III Online Help on the
Product Online Help page
(
)
Note: For documentation conveniences, both Dominion KX II and KX III
products are referred to as "KX III" in the following sections.
Appendix M Integration