LEGRAND Raritan PX3-3000 Series, User Manual

Page: 451 / 977

Chapter 6: Using the Web Interface
430
Field Description
IP address/hostname IP address or host name of the IT
equipment which you want to monitor.
Number of
successful pings to
enable feature The number of successful pings required to
declare that the monitored equipment is
"Reachable." Valid range is 0 to 200.
Wait time after
successful ping The wait time before sending the next ping
if the previous ping was successfully
responded. Valid range is 5 to 600
(seconds).
Wait time after
unsuccessful ping The wait time before sending the next ping
if the previous ping was not responded.
Valid range is 3 to 600 (seconds).
Number of
consecutive
unsuccessful pings
for failure The number of consecutive pings without
any response before the monitored
equipment is declared "Unreachable." Valid
range is 1 to 100.
Wait time before
resuming pinging
after failure The wait time before the PX3 resumes
pinging after the monitored equipment is
declared "Unreachable." Valid range is 1 to
1200 (seconds).
Number of
consecutive failures
before disabling
feature (0 =
unlimited) The number of times the monitored
equipment is declared "Unreachable"
consecutively before the PX3 disables the
ping monitoring feature for it and shows
"Waiting for reliable connection." Valid
range is 0 to 100.
5. On a PDU with outlet switching capability, there is one more
checkbox available --
Power control enabled.
To be able to shut down and power control the monitored IT device
via the Server Reachability page, enable this checkbox and configure
related settings, which are explained in the following table.
6. Click Create.
7. To add more IT devices, repeat the same steps.