LEGRAND Raritan PX3-3000 Series, User Manual

Page: 677 / 977

Chapter 8: Using the Command Line Interface
656
Parameters Description
certificate
Re-upload a different certificate.
a. First add the "certificate" parameter to the command, and
press Enter.
b. The system prompts you for the input of the certificate.
c. Type or copy the content of the certificate in the CLI and
press Enter.
allowExpiredCertificate
<allow_exp_cert>
Determine whether to accept a certificate which is expired or
not valid yet.

<allow_exp_cert> determines whether to accept an expired
or not valid yet certificate

<allow_exp_cert> values include:
true
, and
false
bindDN <bind_DN>
Change the bind DN.

<bind_DN> is the new bind DN.
bindPassword
Change the bind DN password.
a. First add the "bindPassword" parameter to the command,
and press Enter.
b. The system prompts you for the input of the password.
c. Type the password and press Enter.
sortPosition <position>
Change the priority of the server (that is, resorting).

<position> is the new sequential number of the server in
the LDAP server list.
Note: For details of the above variables' values, see Adding an LDAP
Server (on page 648).
Examples:

Change the IP address of the 1st LDAP server
config:# authentication ldap modify 1 host 192.168.3.3

Change both the IP address and TCP port of the 1st LDAP server
config:# authentication ldap modify 1 host 192.168.3.3 port 633

Change the IP address, TCP port and the type of the L1st DAP
server