LEGRAND Raritan PX3-3000 Series, User Manual

Page: 839 / 977

818
There are two types of old PX3 PDUs.

PX3 phase I models

PX3 phase II models
Old PX3 PDUs are different from PX3 with iX7
™
controller in terms of the
following designs:

RS-232 port is a DB9 connector.

Have only one Ethernet port.

Therefore, the networking-related commands in CLI do not have
the options of 'eth1' and 'eth2'. Instead it uses the option of
'ethernet' to refer to its ETHERNET port.

The controller is
not replaceable.

Have no EXPANSION port for the power-sharing feature.
In This Chapter
PX3 'Phase II' Front Panel Display ..........................................................817
PX3 'Phase I' Front Panel Display ...........................................................818
Serial RS-232 "DB9" Port Pinouts...........................................................836
PX3 'Phase II' Front Panel Display
The following diagram is the Zero U model of PX3 'phase II' PDUs.
The operation of its front panel button is similar to the front panel
operation of PX3 with iX7
™
controller (PX3-iX7). See Operating the
Dot-Matrix LCD Display (on page 97).
The major difference between PX3 'phase II' and PX3-iX7 is the symbols
of their control buttons.

functions the same as PX3-iX7's .

functions the same as PX3-iX7's .

functions the same as PX3-iX7's .

functions the same as PX3-iX7's .
Appendix H Old Generations of PX3 Models