LEGRAND Raritan PX3-3000 Series, User Manual

Page: 430 / 977

Chapter 6: Using the Web Interface
409
Placeholder Definition
[INLET] The inlet label
[INLETPOLE] The inlet power line identifier
[INLETSENSOR] The inlet sensor name
[ISASSERTED] Boolean flag whether an event condition became true
(1) or false (0)
[LDAPERRORDESC] The LDAP error occurred
[LHXFANID] The ID of a fan connected to an LHX/SHX
[LHXPOWERSUPPLYID] The ID of an LHX/SHX power supply
[LHXSENSORID] The ID of an LHX/SHX sensor probe
[LOGMESSAGE] The original log message
[MONITOREDHOST] The name or IP address of a monitored host
[NETAUTHRESULTSTR] The network authentication result string ('succeeded'
or 'failed')
[OCP] The overcurrent protector label
[OCPSENSOR] The overcurrent protector sensor name
[OCPTRIPCAUSELABEL] The label of the outlet that likely caused the OCP trip
[OLDVERSION] The firmware version the device is being upgraded
from
[OUTLET] The outlet label
[OUTLETGROUPID] The outlet group ID
[OUTLETGROUPNAME] The outlet group name
[OUTLETGROUPSENSOR] The outlet group sensor name
[OUTLETNAME] The outlet name
Note: If any outlet does not have a name, neither an
outlet name nor an outlet number will be shown in the
custom message for it. Therefore, it is recommended
to check the availability of all outlet names if intending
to use this placeholder.
[OUTLETPOLE] The outlet power line identifier
[OUTLETSENSOR] The outlet sensor name
[PDUPOLESENSOR] The sensor name for a certain power line