LEGRAND Raritan PX3-3000 Series, User Manual

Page: 740 / 977

Chapter 9: Using SCP Commands
719

<port> is the current SSH/SCP port number, or the port number
of a specific slave device in the Port-Forwarding chain.

<filename> is the new filename of the downloaded file.
2. Type the password when prompted.
3. The system downloads the specified data from the PX3 onto your
computer.

If you do NOT specify a new filename in the command, such as
Scenarios 1 or 2, the downloaded file's default name is
"diag-data.zip."

If you specify a new filename in the command, such as Scenarios
3 or 4, the downloaded file is renamed accordingly.
SCP example:
scp admin@192.168.87.50:/diag-data.zip .
Windows PSCP command:
PSCP in Windows works in a similar way to the SCP.

pscp -P <port> <user name>@<device
ip>:/diag-data.zip <filename>
Uploading or Downloading Raw Configuration Data
You can download the raw configuration data of a specific PX3 for review,
backup or modification.
After modifying or creating any raw configuration data, you can upload it
to a specific PX3 for changing its configuration. The uploaded raw
configuration file can contain only partial configuration keys that you
want to modify. Other settings that are not contained in the uploaded file
will remain unchanged.
Syntax of the raw configuration data is completely the same as the
syntax in the config.txt file. See
config.txt
(on page 756).
Warning: Some configuration keys in the downloaded raw
configuration are commented out, and those must NOT be part of the
configuration that will be uploaded to any PX3. See
Keys that Cannot
Be Uploaded (on page 722).
To download raw configuration data:
1. Type one of the following SCP commands and press Enter.