LEGRAND Raritan PX3-3000 Series, User Manual

Page: 576 / 977

Chapter 8: Using the Command Line Interface
555
Quitting Configuration Mode (on page 554).
Quitting Configuration Mode
Both of "apply" and "cancel" commands let you quit the configuration
mode. The difference is that "apply" saves all changes you made in the
configuration mode while "cancel" aborts all changes.
To quit the configuration mode, use either command:
config:# apply
-- OR --
config:# cancel
The # or > prompt appears after pressing Enter, indicating that you have
entered the administrator or user mode. See
Different CLI Modes and
Prompts
(on page 515).
PDU Configuration Commands
One PDU configuration command begins with pdu. You can use the PDU
configuration commands to change the settings that apply to the whole
PX3 device.
Configuration commands are case sensitive so ensure you capitalize
them correctly.
Changing the PDU Name
This command changes the device name of PX3.
config:# pdu name "<name>"
Variables:

<name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.