LEGRAND Raritan PX3-3000 Series, User Manual

Page: 859 / 977

838
This section provides an LDAP example for illustrating the configuration
procedure using Microsoft Active Directory
®
(AD). To configure LDAP
authentication, four main steps are required:
a. Determine user accounts and roles (groups) intended for the PX3
b. Create user groups for the PX3 on the AD server
c. Configure LDAP authentication on the PX3
d. Configure roles on the PX3
Important: Raritan disables SSL 3.0 and uses TLS due to published
security vulnerabilities in SSL 3.0. Make sure your network
infrastructure, such as LDAP and mail services, uses TLS rather
than SSL 3.0.
In This Chapter
Step A. Determine User Accounts and Roles ......................................... 837
Step B. Configure User Groups on the AD Server .................................. 838
Step C. Configure LDAP Authentication on the PX3 ............................... 839
Step D. Configure Roles on the PX3........................................................ 842
Step A. Determine User Accounts and Roles
Determine the user accounts and roles (groups) that are authenticated
for accessing the PX3. In this example, we will create two user roles with
different permissions. Each role (group) will consist of two user accounts
available on the AD server.
User roles User accounts (members)
usera PX_User
pxuser2
userb PX_Admin
pxuser
Group permissions:

The PX_User role will have neither system permissions nor outlet
permissions.

The PX_Admin role will have full system and outlet permissions.
Appendix I LDAP Configuration Illustration