LEGRAND Raritan PX3-3000 Series, User Manual

Page: 637 / 977

Chapter 8: Using the Command Line Interface
616
config:# security roleBasedAccessControl ipv6 enabled <option>
Determine the IPv6 role-based access control policy:
config:# security roleBasedAccessControl ipv6 defaultPolicy <policy>
Variables:

<option> is one of the options: true or false.
Option Description
true Enables the role-based access control feature.
false Disables the role-based access control feature.

<policy> is one of the options:
allow or deny.
Policy Description
allow Accepts traffic from all IP addresses regardless
of the user's role.
deny Drops traffic from all IP addresses regardless of
the user's role.
Tip: You can combine both commands to modify all role-based access
control parameters at a time. See
Multi-Command Syntax
(on page
696).
Managing Role-Based Access Control Rules
You can add, delete or modify role-based access control rules.

An IPv4 role-based access control command for managing rules
begins with
security roleBasedAccessControl ipv4 rule.

An IPv6 role-based access control command for managing rules
begins with
security roleBasedAccessControl ipv6 rule.
Adding a Role-Based Access Control Rule
Depending on where you want to add a new rule in the list, the command
syntax for adding a rule varies.

IPv4 commands
Add a new rule to the bottom of the IPv4 rules list: