LEGRAND Raritan PX3-3000 Series, User Manual

Page: 932 / 977

Appendix L: Additional PX3 Information
911
Messages for the USB-cascading chain:
In the Bridging mode, events regarding connection/disconnection of a
downstream slave device via USB is NOT logged.
However, in the Port Forwarding mode, whenever the connection or
disconnection of a downstream slave device via USB is detected, the PX3
at the USB-A end of the USB cable logs it in the internal log. Note that
the PX3 at the USB-B end of the cable does NOT log these events.
There are two slave-related events in the Port Forwarding mode:
Event Description
Slave connected This log entry is generated when the PX3 detects
the presence of a slave device on its USB-A port.
Slave
disconnected This log entry is generated when it detects the
disconnection of a slave device from its USB-A
port.
The Ping Tool
The PX3 provides a ping tool in the web interface and CLI so you can ping
any host or PX3 in your data center.
Ping via the Web Interface:
To log in to the web interface, see Login (on page 148).
The Ping tool is useful for checking whether a host is accessible through
the network or Internet.

Choose Maintenance > Network Diagnostics
Ping via the CLI:
You can access the CLI interface by connecting a computer to the PX3 or
using SSH/Telnet. See
With SSH or Telnet (on page 513).
1. You must perform the ping command in the diagnostic mode. See
Entering Diagnostic Mode
(on page 708).
2. Then perform the ping command. See Testing the Network
Connectivity (on page 709).