LEGRAND Raritan PX3-3000 Series, User Manual

Page: 520 / 977

Chapter 6: Using the Web Interface
499
To view the status of the door and card reader:
Section Description
Door State
Shows all sensor states detected by DX2-DH2C2,
including:

Door: States of contact closure sensors connected
to DX2-DH2C2. Contact closure sensors detect
whether the door is physically opened or closed.

Door Lock: States of door locks integrated with the
door handles.

Door Handle Lock: States of the door handle locks.
Door locks and door handle locks are interrelated so
their states are changed one after another. The door
handle lock is opened first and then the door lock.
Exception: If you manually open the door lock with the
key shipped with your door handle, the Door Lock
state will enter the open state while the Door Handle
Lock state remains closed.
Card Reader
Shows the data of the smart card scanned by the
internal or external card reader accompanying each
door handle connected to DX2-DH2C2.
Note: It is not necessary to use the internal card
reader unless you are using a third-party application,
such as Power IQ, for access control. Refer to the user
documentation of your third-party application for
more information.
Tip: All sensors of the connected door handles are also listed on the
page of
Peripherals
(on page 231).
Note that the same Card Reader information is also available on the
page of
Card Readers
(on page 499).
To control the door handles:
Per default, only one door handle can be opened at the same time so
you must close one door handle before opening another door handle
connected to the same PX3. To increase the upper limit of
concurrently opened door handles, see
Peripherals
(on page 231).
1. Make sure you have configured the door handle type properly in the
above procedure.