LEGRAND Raritan PX3-3000 Series, User Manual

Page: 692 / 977

Chapter 8: Using the Command Line Interface
671
Commands for Inlet Sensors
A sensor configuration command for inlets begins with
sensor inlet.
You can configure various inlet sensor threshold settings at a time by
combining multiple commands. See
Multi-Command Syntax (on page
696).
Set the Upper Critical threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> upperWarning <option>
Set the Lower Critical threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> lowerCritical <option>
Set the Lower Warning threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> lowerWarning <option>
Set the deassertion hysteresis for an inlet sensor:
config:# sensor inlet <n> <sensor type> hysteresis <hy_value>
Set the assertion timeout for an inlet sensor:
config:# sensor inlet <n> <sensor type> assertionTimeout <as_value>
Variables:

<n> is the number of the inlet that you want to configure. For a
single-inlet PDU, <n> is always 1.

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor