Chapter 6: Using the Web Interface
383
The maximum amount of snapshots that can be stored on the
PX3 is 10. If you set it for a number greater than 10 and the
storage location is on the PX3, after the 10th snapshot is taken
and stored, the oldest snapshots are overwritten. Storing
snapshots on a remote server does not have such a limitation.
Time before first snapshot - the amount of time in seconds
between when the event is triggered and the webcam begins
taking snapshots.
Time between snapshots - the amount of time in seconds
between when each snapshot is taken.
Folder - names of the folders that will be automatically created
to store webcam snapshots after the recording action is
triggered by the rule you will configure.
Note that the Folder field is available only when the selected
webcam has been configured to store its snapshots on an "FTP"
server. See
Changing Storage Settings
(on page 488).
Folder name options
Definition
Serial number / Webcam name Two folders will be created.
The parent folder's name is the serial number of PX3.
The subfolder's name is the selected webcam's name.
Serial number / Webcam name
/ Rule name
Three folders will be created.
Definitions of the parent folder and first subfolder are the same
as the first row.
The final subfolder's name is the name of event rule that triggers
this recording action.
Serial number / Webcam name
/ Timestamp
Three folders will be created.
Definitions of the parent folder and first subfolder are the same
as the first row.
The final subfolder's name is the time when the recording event
occurs, which is the accumulated time in seconds since 1970/1/1.
Serial number / Webcam name
/ Rule name / Timestamp
Four folders will be created.
Definitions of the parent folder and first subfolder are the same
as the first row.
The second subfolder's name is the name of event rule that
triggers this recording action.
The final subfolder's name is the time when the recording event
occurs, which is the accumulated time in seconds since 1970/1/1.
Summary of Contents for Raritan PX3-3000 Series
