LEGRAND Raritan PX3-3000 Series, User Manual

Page: 494 / 977

Chapter 6: Using the Web Interface
473
5. Wait until the PX3 resets and the Login page re-appears, indicating
that the restore is complete.
Note: On startup, PX3 performs all of its functions, including event rules
and logs, based on the new configuration you have copied instead of the
previous configuration prior to the device reset. For example, the "Bulk
configuration copied" event is logged only when the new configuration
file contains the "Bulk configuration copied" event rule.
The last configuration-copying record:
If you once copied any bulk configuration or device backup file to the PX3,
the last record similar to the following is displayed at the bottom of both
the Bulk Configuration and Backup/Restore pages.
Alternative:
To use a different method to perform backup/restore, refer to:

Backup and Restore via SCP (on page 715)
Network Diagnostics
PX3 provides the following tools in the web interface for diagnosing
potential networking issues.

Ping: The tool is useful for checking whether a host is accessible
through the network or Internet.

Trace Route: The tool lets you find out the route over the network
between two hosts or systems.

List TCP Connections: You can use this function to display a list of
TCP connections.
Tip: These network diagnostic tools are also available through CLI. See
Network Troubleshooting (on page 707).
Choose Maintenance > Network Diagnostics, and then perform any
function below.
Ping:
1. Type values in the following fields.
Field Description
Network host The name or IP address of the host that you want
to check.