LEGRAND Raritan PX3-3000 Series, User Manual

Page: 557 / 977

Chapter 8: Using the Command Line Interface
536
Inlet Pole Sensor Threshold Information
This command is only available for a three-phase PDU except for an
in-line monitor (PX3-3000 series).
This command syntax shows the specified inlet pole sensor's
threshold-related information.
# show sensor inletpole <n> <p> <sensor type>
To show detailed information, add the parameter "details" to the end of
the command.
# show sensor inletpole <n> <p> <sensor type> details
Variables:

<n> is the number of the inlet whose pole sensors you want to query.
For a single-inlet PDU, <n> is always 1.

<p> is the label of the inlet pole whose sensors you want to query.
Pole Label
<p> Current sensor Voltage sensor
1 L1 L1 L1 - L2
2 L2 L2 L2 - L3
3 L3 L3 L3 - L1

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
voltage Voltage sensor
activePower Active power sensor
apparentPower Apparent power sensor
powerFactor Power factor sensor
activeEnergy Active energy sensor