LEGRAND Raritan PX3-3000 Series, User Manual

Page: 326 / 977

Chapter 6: Using the Web Interface
305
Mode Description
None
No cascading mode is enabled. This is the
default.
Bridging
Each device in the cascading chain is
accessed with a different IP address.
Port Forwarding
Each device in the cascading chain is
accessed with the same IP address(es) but
with a different port number assigned.
For details on port numbers, see Port
Number Syntax
(on page 308).
Tip: If selecting Port Forwarding, the Device Information page will
show a list of port numbers for all cascaded devices. Simply choose
Maintenance > Device Information > Port Forwarding.
5. For the Port Forwarding mode, one to two more fields have to be
configured.
Note that if either setting below is incorrectly configured, a
networking issue occurs.
Field Description
Port forwarding role
(available on all
cascaded devices)
Master or Slave.
This is to determine which device is the
master and which ones are slave
devices.
Downstream interface
(available on the maser
device only)
USB or ETH1/ETH2.
This is to determine which port on the
master device is connected to Slave 1.
If ETH1 or ETH2 is selected as the
downstream interface, make sure the
selected Ethernet interface is enabled.
6. (Optional) Configure the network settings by clicking the BRIDGE,
ETH1/ETH2, or WIRELESS section on the same page.

In the Bridging mode, each cascaded device can have different
network settings. You may need to configure each device's
network settings in the BRIDGE section.