Kollmorgen AKD PDMM series, User Manual

Page: 30 / 513

AKD PDMM User Guide | 5.1 Drive Overview
5.1 Drive Overview
Once your drive is connected, the Overview shows a summary of the drive that you are using.
You can view or edit the following information from the Overview window.
Button or
Dialog Box
Description Parameter
Name Names each drive in use with a unique identifier. DRV.NAME (pg 291)
Drive
Model Displays the model number of this drive. The model number is also
on the label on the side of the drive.
If you are offline, then you can change the type of drive that you are
simulating.
DRV.INFO (pg 287)
Drive Type Selects the operational fieldbus for your drive. DRV.TYPE (pg 299)
Drive
Active The drive is active when it is enabled and also supplies voltage to
the motor. DRV.ACTIVE (pg
264)
Enable Click Enable to turn on the power stage in the drive and apply volt-
age to the motor. This command may fail for many reasons; see
"DRV.EN " (=> p. 281) for further details.
DRV.EN (pg 281)
Disable Click Disable to turn off the power stage and remove the voltage
applied to the motor. DRV.DIS (pg 272)
Drive Dis-
play This graphic replicates the two-digit seven-segment display
located on the front face of the drive. The seven-segment display
shows a code that indicates the state of the drive and any faults
that may be present. EWV
1
shows a copy of what the drive display
currently shows. A key to the display is here .
Blink Click Blink to force the display to alternate between the whole dis-
play being on and the whole display being off for 20 seconds. You
can use this button to confirm that you are communicating with the
correct drive hardware. DRV.BLINKDISPLAY
(pg 264)
Setup Wiz-
ard The Setup wizard takes you through the essential configuration
steps so that you can control the motor movement.
1
Embedded Workbench Views
30 Kollmorgen™ | December 2012