Kollmorgen AKD PDMM series, User Manual

Page: 334 / 513

AKD PDMM User Guide | 33.3 FBUS.PLLTHRESH
General Information
Description Returns the status of the PLL
Units N/A
Range N/A
Default
Value
N/A
Data Type N/A
See Also
FBUS.PARAM1 TO FBUS.PARAM10 (pg 332), Fieldbus doc-
umentation
Start Version M_01-02-00-000
Description
FBUS.PLLSTATE returns the status of the phase locked loop (PLL). The PLL states are as fol-
lows:
PLL State Description
PLL not acti-
vated This state is set using FBUS.PARAM02. Not each fieldbus or operation mode
needs synchronization.
PLL acti-
vated, but
unlocked
The PLL is activated but has not yet been locked successfully. This state is
related to the fieldbus master, as well as to the fieldbus mode of operation.
PLL acti-
vated and
locked
PLL is fully operational and locked
For more information, see the AKD PDMM CANopen Manual , Phase Locked Loop.
33.3 FBUS.PLLTHRESH
General Information
Type NV Parameter
Description
Sets number of successful synchronized cycles needed to lock the
PLL.
Units N/A
Range 0 to 10,000
Default
Value
0
Data Type Integer, U32
See Also Appendix B: Fieldbus Manuals
Start Version M_01-00-00-000
Description
This parameter sets number of successful synchronized cycles needed to lock the PLL.
334 Kollmorgen™ | December 2012