Hioki Power HiTester 3193, Instruction Manual

Page: 93 / 310

75
────────────────────────────────────────────────────
7.6 Integration Using Time Settings (Controlled by Panel Keys)
────────────────────────────────────────────────────
NOTE
7.6.1 Timer Integration
Start
Reset
Integration
display value
Stop
Hold
Integration value
Time
Timer time
Auto stop
SHIFT
START
/STOP
START
/STOP
Start
Reset
Stop
Hold
Integration value
Time
Timer time
Auto stop
Integration
display value
Interval
time
Auto stop
SHIFT
START
/STOP
START
/STOP
7.6 Integration Using Time Settings
(Controlled by Panel Keys)
By first setting the interval, timer, or real-time control time, and then
pressing the
START/STOP key, integration can be carried out for the specified
time.
･
When the interval time is set, data for each interval of the interval time
setting is not displayed on the screen. This must be combined with the
floppy disk drive (only 3193) or (optional) printer function.
･
If the timer (or real-time control) end timing does not coincide with the
interval timer timing, then the integration ends with the timer (or real-time
control) end timing, and the last interval timing is ignored.
･
While the hold function is activated by pressing the
HOLD
key, and when the
interval time is set, the display is updated every interval time. When the
timer time or real control time is set, the final data is displayed at the end of
setting time.
After integrating for the time specified the unit automatically stops. In this
case the integration result is held.
When the interval time is set, for each interval specified the total integration
value at that point is written to the floppy disk or printer.