Hioki Power HiTester 3193, Instruction Manual

Page: 24 / 310

6
────────────────────────────────────────────────────
2.1 Panels and Key Operation
────────────────────────────────────────────────────
FUNCTION MEAS
Changes to the measurement value display screen
STATUS
Changes to the settings display screen
FDD
(∗)
Used for setting the file name of the floppy disk, and saving
and recalling unit settings.
PAGE
In the MEAS and STATUS screens, used to switch display for
the item in the second row from the top.
RANGE
U
+
/
U -
Changes the voltage range on the displayed channel. Pressing
both keys sets to the auto ranging.
SHIFT
→
U
+
Pressing the
SHIFT
key and then pressing the
U +
key toggles
the voltage for the displayed channel between RMS and
MEAN.
I
+
/
I
-
Changes the current range on the displayed channel. Pressing
both keys sets to the auto ranging.
SHIFT
→
I +
Pressing the
SHIFT
key and then pressing the
I
+
key toggles
the current for the displayed channel between RMS and
MEAN.
SHIFT
→
I
-
Pressing the
SHIFT
key and then pressing the
I
-
key executes
degaussing. This effects only when using the 9600 input unit,
or when using the 9602 in combination with AC/DC clamp.
OUTPUT OUTPUT
Outputs the display screen to the FDD
(∗)
or printer.
COPY
Sends a copy of the screen to the FDD
(∗)
or printer.
SHIFT
→
COPY
Prints the current settings of the unit on the FDD
(∗)
or printer.
SAVE/PRINT
(∗)
Outputs the specified items to the FDD
(∗)
or printer.
SHIFT
→
SAVE/PRINT
(∗)
Feeds the printer paper. During printing, pressing this key
ends the printing.
CURSOR ▲▼
Used to move the cursor for settings and so on.
SHIFT
→
Changes the connection mode on the measurement screen for
each channel.
SHIFT
→
▲
Changes the response mode on the measurement screen for
each channel.
SHIFT
→
Changes the low-pass filter on the measurement screen for
each channel.
HOLD HOLD
Stops display updating of all measurement values, then each
subsequent press updates the display.
SHIFT
→
HOLD
When not in the hold mode, this switches to the peak hold
mode. Press
SHIFT
and
HOLD
again to release this setting. In
this mode, pressing the
HOLD
key resets and then it is in the
peak value hold mode.
LOCAL LOCAL
Used to end remote control.
SHIFT
→
LOCAL
Locks the panel keys. Press
SHIFT
and
LOCAL
again to release
this setting.
START/
STOP
START/STOP
Starts and stops each time controls (integration, time
averaging, automatic output to FD/printer).
SHIFT
→
START/STOP
After stopping the integraion, this key combination resets the
elapsed time and integration values.
F1 to F5
Used to select setting items.
POWER
Powers the unit on and off.
(
∗
: There is no FDD or FDD key in the HIOKI 3193-10. SAVE/PRINT key is the PRINT key.)