Hioki Power HiTester 3193, Instruction Manual

Page: 52 / 310

34
────────────────────────────────────────────────────
4.1 Setting the Wiring Mode (1P2W to 3P4W)
────────────────────────────────────────────────────
UNIT Page
Wiring Screen
UNIT Page
##41-2.tif
-3
-4
UNIT
WIRING
NOTE
1. Press the
STATUS
key, then use the
PAGE
( )
keys to display the "
UNIT
" page.
2. Using the CURSOR keys, move the cursor to the
" WIRING " item.
3. Press
F5
( SELECT ) to switch to the connection
setting screen.
4. In the Wiring screen, a list of the installed input
units appears.
Move the cursor to the desired combination to be
selected.
5. Press
F1
(
SET
) to confirm. This automatically
returns to the previous screen.
6. When a number of channels are combined, move
the cursor to the wiring item.
When using two channels, select from
F1
(
1P3W
)
and
F2
(
3P3W
), and for three channels select from
F1
(
3V3A
) and
F2
(
3P4W
).
7. Press the
MEAS
key to return to the measurement
screen, where measurement is now possible.
On the Wiring screen, if the combination is not
changed and then
F1
is pressed, the setting items
may be initialized. Pressing the
PAGE
key to exit
from the screen does not initialize the items.