Hioki Power HiTester 3193, Instruction Manual

Page: 246 / 310

228
────────────────────────────────────────────────────
13.7 Printing Out
────────────────────────────────────────────────────
Timer
START
/STOP
Auto stop
: Print
Interval
START
/STOP
START
/STOP
Waiting
START
/STOP
Auto stop
stop time
Real time control
Auto start
start time
Timer
Interval
START
/STOP
Auto stop
Waiting
Interval
START
/STOP
Auto stop
stop time
Auto start
start time
Real time control
NOTE
① Timer
Printing occurs when
START/STOP
key is pressed
and then stops automatically.
② Interval time
Printing occurs when the
START/STOP
key is
pressed, for each interval elapsed, and then stops
when the
START/STOP
key is pressed or 10000
hours elapsed.
③ Real time control
" stand-by " is displayed until start time is reached
and printing occurs automatically at the start time
and stop time, and then stops automatically.
④ Timer + Interval time
Printing occurs when the
START/STOP
key is
pressed, for each interval elapsed, and then stops
automatically.
For integration, the integration values for each
interval are printed, and then the total values at the
stop time.
⑤ Real time c interval time
Printing occurs at the start time, for each interval
elapsed, and at the stop time, then stops.
For integration, the integration values for each
interval are printed, and then the total values at
the stop time.
･
If the panel
SAVE/PRINT
key is pressed, then manual printing is carried out,
and the automatic printing does not start.
･
During automatic output by each time control, the
SAVE/PRINT
key is
invalid.
･
If the timer end timing does not coincide with the interval timer timing, then
the unit stops with the timer end timing, and the last interval timing is
ignored.
･
If the real-time control end timing does not coincide with the interval timer
timing, then the unit stops with the real-time control end timing, and the last
interval timing is ignored.
･
When combined with time averaging or integration, during operation it is not
possible to change the settings, and the setting data is therefore saved at the
start time only.
･ When combined with integration or time averaging, the operations are
synchronized.
･ When controlled by the
START/STOP
key, integration always operates.
Therefore, if after repeated start/stop operations the total time reaches 10,000
hours, the
START/STOP
key is no longer accepted.