Hioki Power HiTester 3193, Instruction Manual

Page: 74 / 310

56
────────────────────────────────────────────────────
4.12 Setting on the SYSTEM screen
────────────────────────────────────────────────────
4.12.7 Setting the Display Language (English/Japanese)
F1 F2
LANGUAGE
SYSTEM
4.12.8 Setting the Real-time Clock
418-1.tif CHANGE
F1 F2 F5
REAL TIME CLOCK
SYSTEM
NOTE
Display messages can be selected to appear in either Japanese or English.
1. Press the
STATUS
key, then use the
PAGE
( )
keys to display the " SYSTEM " page.
2. Using the
CURSOR
keys, move the cursor to the
"
LANGUAGE
" item.
3. Select from
F1
(JAPANESE) or
F2
( ENGLISH ).
4. Press the
MEAS
key to return to the measurement
screen.
Instead of above procedure, hold down the STATUS
key and turn the power on, the display in English
appears.
This sets the internal real-time clock.
1. Press the
STATUS
key, then use the
PAGE
( )
keys to display the "
SYSTEM
" page.
2. Using the CURSOR keys, move the cursor to the
digit to be set on the right of the " REALTIME
CLOCK " item.
3. Set the time using
F1
(↑)
or
F2
(
↓
).
The settings are completed after the time is set.
4. Press
F5
(SET) to end setting.
･
The clock uses 24-hour time.
･ Support until 2078.
･ If
F5
(SET) is not pressed after time is set, the setting time after powering
off is returned to the previous setting.