Hioki Power HiTester 3193, Instruction Manual

Page: 73 / 310

55
────────────────────────────────────────────────────
4.12 Setting on the SYSTEM screen
────────────────────────────────────────────────────
4.12.5 Setting the Beep Sound
415-1.tif
F1 F2
BEEP
SYSTEM
NOTE
4.12.6 Setting Indications for Out-of-Range Inputs
Only indication of numerical
value is faint.
422-1.tifCHANGE
F1 F2
DEFINED
SYSTEM
NOTE
This unit sounds a "beep" each time a key is pressed.
1. Press the
STATUS
key, then use the
PAGE
( )
keys to display the " SYSTEM " page.
2. Using the
CURSOR
keys, move the cursor to the
"
BEEP
" item.
3. Select from
F1
(OFF) or
F2
( ON ).
4. Press the
MEAS
key to return to the measurement
screen.
When an error occurs, the beep sounds, irrespective of this setting.
This functions selects whether or not the numerical values appear in a
different color when outside the set range.
1. Press the STATUS key, then use the PAGE ( )
keys to display the "
SYSTEM
" page.
2. Using the CURSOR keys, move the " DEFINED " item.
3. Press
F1
(
OFF
) or
F2
(
ON
).
･
For the out of range input, see the specifications of
each input units.
･ An active power value is treated as out of range
when either of the voltage and current values is out
of range.
･
A reactive power ( Q ), apparent power ( S ), power
factor (
λ
), or phase angle (
φ
) value is treated as
out of range when either of the voltage ( U ), current
( I ), power ( P ) values is out of range.