Hioki Power HiTester 3193, Instruction Manual

Page: 195 / 310

177
────────────────────────────────────────────────────
:MEASure:ITEM:SUM
────────────────────────────────────────────────────
Syntax
:MEASure:ITEM:SUM
<NR1, (7
items)>
<NR1> = 0 - 63.
Example
:MEASURE:ITEM:SUM 7,7,7,0,0, 0,0
Sets the U12, U34, U56, I12, I34, I56,
P112, P34, P56 as the default items.
Syntax
:MEASure:ITEM:SUM?
Response
syntax
:MEASURE:ITEM:SUM
<0-63>
Example
Transmission
Response
:MEASURE:ITEM:SUM?
:MEASURE:ITEM:SUM 7,7,7,0,0,0,0
Function
Sets the default items (only SUM value)
to be transferred in the response message
to the :MEASure? query in the default
mode.
The items are set as shown below by
setting bits, to specify seven numerical
values.
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
1 － － U45 U456 U123 U56 U34 U12
2 － － I45 I456 I123 I56 I34 I12
3 － － P45 P456 P123 P56 P34 P12
4 － － S45 S456 S123 S56 S34 S12
5 － － Q45 Q456 Q123 Q56 Q34 Q12
6 － － PF45 PF456 PF123 PF56 PF34 PF12
7 － － DEG45 DEG456 DEG123 DEG56 DEG34 DEG12
Error
Execution error / If the setting data is out
of the range.
Note
Depending on the optional unit installing,
if the set items which cannot be selected
is ignored.
Function
Queries the default items specified by
SUM value.
:MEASure:ITEM:SUM
Sets the output item for the SUM value.
:MEASure:ITEM:SUM?
Queries the output item for the SUM value.