Hioki Power HiTester 3193, Instruction Manual

Page: 118 / 310

100
────────────────────────────────────────────────────
11.6 Setting File Names for Saved Measurement Data
────────────────────────────────────────────────────
F1 F2 F3 F4 F5
Meas. data file
NOTE
11.6 Setting File Names for Saved Measurement Data
The file name consists of up to eight characters. Use the following example
as a guide to setting the file name.
116-1.tif CHANGE
1. Press the FDD key to display the FDD screen.
2. Using the
CURSOR
keys, move the cursor to "
Meas.
data file
".
3. Press the
F1
(Set)
key to set. The character list
which can be select is displayed on the lower part
of screen.
4. Using the
CURSOR
keys, move the cursor to desired
character and press the
F1
(Enter)
to enter. To
correct it, Press
F2
(←),
F3
(→),
F4
(Backspace)
.
5. After settings, press the
F5
(Confirm)
key. The
character list goes off.
6. Press the MEAS key to return the measurement
screen, and then press the SAVE/PRINT or
START/STOP key to start saving a setting file
name.
･
If a file of the specified name already exists on the floppy disk, the file is
automatically saved as another name. If the file name is not specified, it is
saved in the same way.
･
A space is invalid in the file name.
CHANGE
Enter
Backspace
Confirm