Hioki Power HiTester 3193, Instruction Manual

Page: 239 / 310

221
────────────────────────────────────────────────────
13.1 Overview
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CAUTION
・ Using the printer in a high-temperature or high-humidity environment
should be avoided at all costs. This can seriously reduce the printer
life.
・ For long-term storage, ensure that the recording head is in the up
position. Otherwise the rollers can be deformed, leading to uneven
printing.
・ The printer is a thermal printer. The recording paper has
characteristics finely tuned for use with the printer. Using recording
paper of a different specification may not only result in impaired
printing quality, but even prevent the printer from operating. Always
use the HIOKI specified product.
・ Color printing is not possible.
・ The printing is not affected by the English/Japanese setting for the
display.
・ Store the thermal paper at not more than 40℃ and 90%RH. If light
reaches the paper over a long period, the paper will discolor. Do not
unwrap rolls of paper until you are ready to use them.
・To keep definitive data, make photocopies of the recordings.
・ If the thermal paper absorbs an organic solvent such as alcohols or
ketones, it may no longer develop properly, and recorded information
may fade. Soft PVC film and transparent contact adhesive tape
contain such solvents, so avoid using them with recordings.
・ Avoid interleaving the thermal recordings with damp diazo copies.
・ The amount of recording possible on a new roll of paper (10 m)
depends on the coupling mode, the automatic output, and other
conditions. For long-term output under the same conditions, calculate
the length required by carrying out a test printing.
Chapter 13
Using the Printer (Option)
13.1 Overview
This unit can be used with internal thermal printer as option. The measured
data and setting data can be easily printed out.