Hioki Power HiTester 3193, Instruction Manual

Page: 180 / 310

162
────────────────────────────────────────────────────
:EXTernalin [channel no.] :SCALe?
────────────────────────────────────────────────────
Syntax
:EXTernalin [
A/B
]:SCALe?
Response
syntax
:EXTERNALIN[
A/B
]:SCALE
<NR1>
Example
Transmission
Response
:EXTERNALINA:SCALE?
:EXTERNALINA:SCALE 10
Syntax
:EXTernalin
[A/B]
:UNIT
<units>
units = V, Nm, mNm, kNm, kgfm,
kgfcm, rpm
Example
:EXTERNALINA:UNIT Nm
Sets the units for channel A of the
9603 to Nm.
Syntax
:EXTernalin
[A/B]
:UNIT?
Response
syntax
:EXTERNALIN
[A/B]
:UNIT
<units>
Example
Transmission
Response
:EXTERNALINA:UNIT?
:EXTERNALINA:UNIT NM
Syntax
:EXTernalinB:PULSe
<ON/OFF>
Example
:EXTERNALINB:PULSE ON
Sets the input type for channel B to
pulse input.
Function
Queries the scaling value for the specified
channel of the 9603.
Function
Sets the units for the specified channel of
the 9603.
The units are accepted in capital and
small letters.
Function
Queries the units for the specified
channel of the 9603.
The unit is output in capital letter.
Function
Sets the input type for the channel B of
the 9603 to analog input or pulse input.
Note
When the input type is set to pulse input,
the source for frequency measurement
channel fc is automatically set to channel
B of the 9603.
When it is set to OFF, the voltage range
for channel B is 10 V.
:EXTernalin [
channel no.
] :SCALe?
Queries the scaling value of the 9603.
:EXTernalin [
channel no.
] :UNIT
Sets the units for channel of the 9603
:EXTernalin [
channel no.
] :UNIT?
Queries the units for channel of the 9603
:EXTernalinB:PULSe
Sets the input type for channel B of the 9603.