Hioki Power HiTester 3193, Instruction Manual

Page: 172 / 310

154
────────────────────────────────────────────────────
:DATAout:ITEM:NORMal
────────────────────────────────────────────────────
Syntax
:DATAout:ITEM:NORMal
<NR1,..
(8 items)>
<NR1> = 0 - 63
Example
:DATAOUT:ITEM:NORMAL
7,7,7,0,0,0,0,0
As the default output items to the
floppy disk drive or printer for normal
measurement, specify U1, U2, U3, I1,
I2, I3, P1, P2, P3.
Syntax
:DATAout:ITEM:NORMal?
Response
syntax
:DATAOUT:ITEM:NORMAL
<
0‑63
>
Example
Transmission
Response
:DATAOUT:ITEM:NORMAL?
:DATAOUT:ITEM:NORMAL
7,7,7,0,0,0,0,0
Function
Sets the output items (8 items) for
measurement value for each channel
(excluding sum value)
The items are set as shown below by
setting bits, to specify eight numerical
values.
bit
7
bit
6
bit
5
bit
4
bit
3
bit
2
bit
1
bit
0
1 － － U6 U5 U4 U3 U2 U1
2 － － I6 I5 I4 I3 I2 I1
3 － － P6 P5 P4 P3 P2 P1
4 － － S6 S5 S4 S3 S2 S1
5 － － Q6 Q5 Q4 Q3 Q2 Q1
6 － － PF6 PF5 PF4 PF3 PF2 PF1
7 － － DEG6 DEG5 DEG4 DEG3 DEG2 DEG1
8 － － PK6 PK5 PK4 PK3 PK2 PK1
Error
Execution error / If the setting data is out
of the range.
Note
The items P, S, Q, PF, DEG are invalid
in connection mode 3P3W or 3V3A.
Depending on the optional unit installing,
if the set items which cannot be selected
is ignored.
Function
Queries the output items (8 items) for
measurement value for each channel
(excluding sum value).
:DATAout:ITEM:NORMal
Sets the output item for the normal measurement.
:DATAout:ITEM:NORMal?
Queries the output item for the normal measurement.