Hioki Power HiTester 3193, Instruction Manual

Page: 69 / 310

51
────────────────────────────────────────────────────
4.11 Setting on the MEAS Screen
────────────────────────────────────────────────────
F2
F1
F5
NOTE
4.11.2 Setting the SELECT screen
421-1.tif
F1 F2 F3 F5
NOTE
Setting items on "MAGNIFY" display
1. Select the magnification display to be set on
channel screen, and press
F5
(SELECT).
The item list which can be selected is displayed.
2. Using the
CURSOR
keys, move the cursor to the
desired display and select item from
F1
(
↑
) or
F2
(
↓
) to decide setting.
To clear the setting display press
F2
(OFF).
3. Press
F5
(RETURN) to complete settings.
On the integration display screen, the integration item cannot be set.
On the magnification display, the integration value cannot be selected.
This function allows a desired subset of the measurement values to be
selected, and displayed together on the screen.
There are three modes: with four, eight, or 16 items displayed. The modes
are selected with function keys
F1
to
F3
.
The following procedure describes how to select a four-item display, and the
procedure for eight or 16 items is similar.
The method of setting, see Section 4.11.1, "Setting the Display Item."
･
In the SELECT screen, the panel key operations for voltage range, current
range, RMS/MEAN selection, and degaussing (DMAG) are disabled. If
changes are required, switch to the STATUS "
UNIT " display for the relevant
channel.
･
On the SELECT screen, only response setting can be made. Set for others on
the STATUS screen or on the display screen for each channels.
･ The integration value can not be selected.