71
────────────────────────────────────────────────────
7.2 Setting the Control Time
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
7.2.3 Setting the Real Time Control
F1
F2
TIME
REAL TIME CONTROL
NOTE
Using the real-time control function, the internal real-time clock in the unit
can be used to start and stop operation at specified times. This can also be
used in combination with the interval time, to subdivide the time specified
by real-time control.
1. Set the start and stop time of the real time control
time in the same way of the interval time setting.
2. Press the
MEAS
key to return to the measurement
screen.
3. Press the
START/STOP
key, "
INTEG
" and "
STIME
"
are displayed.
Once the set stop time is reached, operation
automatically stops.
4. To stop operation during controlling, press the
START/STOP
key again.
411-4.TIF CHANGE
・
The time setting is in steps of 1 minute.
・
The time is specified with a four-digit year, and 24-hour times.
・
If a time point has already passed, the real-time control is ignored.
・
If it stops operation during control, the real-time control is forcibly ignored.
・
Even if the real-time control function is enabled, The operation starts by
start time, and it is completed by timer control. In this case, the stop time is
ignored.
Summary of Contents for Power HiTester 3193
