Hioki Power HiTester 3193, Instruction Manual

Page: 26 / 310

8
────────────────────────────────────────────────────
2.2 Names and Configuration of Screen
────────────────────────────────────────────────────
2.2.1 Screen Configuration
Data file name
Set up file name
Screen copy file name
File list
Disk format
Remaining space
Display returns on the channel selected
when the unit was powered off
∗
: T here is no FDD or
FDD key,FDD screen
in t h e HIOKI 3193-10.
Power on
MEAS FDD
Second time or later
Factory settings
FDD
Display items
P: PAGE keys
C: CURSOR keys
F: F1 to F5 keys
C
STATUS screen
P
C
UNIT
TIME
FREQ/
OUTPUT
SYSTEM
EFFI
Range, PT ratio, CT ratio,
SC ratio, LPF, phF, peak
Response, average, interval
time, timer time, real-time
control time
Output device, output item,
saving color, D/A output,
frequency source, frequency
range
Interface, display color, back-
light, calculation, beep sound,
language, real time, system
reset, out-of-range input
display
Calculation, setting
Voltage range, scaling, unit
EXT UNIT
HARMONIC/FLICKER
F
MEAS screen
1ch
2ch
P
3ch
4ch
5ch
6ch
SELECT
EFFI
EXT IN
WIRING
F
MAGNIFY
DETAILS
INTEG-
RATED
F
4 ITEMS
8 ITEMS
16 ITEMS
FUNCTION
(in 1P2W mode)
STATUS
FDD screen
(∗)
HARMONIC
/FLICKER
In 1 P3W, 3P3W mode:
channels 1+2, 3+4,
4+5, 5+6
In 3V3A, 3P4W mode:
channels 1+2+3, 4+5+6
Option installation display screen
Screen paths when all options are installed.
NOTE
2.2 Names and Configuration of Screen
The three basic screens are the MEAS (measurement) screen, the STATUS
screen, and the FDD (floppy disk drive) screen
(∗)
. Pressing the
MEAS
,
STATUS
, or
FDD
key
(∗)
on the panel switches to the corresponding screen.
This configuration is when all options are installed.
When the unit is first powered on after purchase, and after a system reset,
the display for channel 1 appears. Thereafter, the display returns on the
channel selected when the unit was powered off.