Hioki Power HiTester 3193, Instruction Manual

Page: 150 / 310

132
────────────────────────────────────────────────────
*ESE0
────────────────────────────────────────────────────
Syntax
*ESE0
<NR1>
<NR1> = 0 to 255
Example
Transmission
*ESE0 34
Bits 5 and 1 of ESER0 are set to 34.
32+2=34
Syntax
*ESE0?
Response
syntax
Same as *ESE0
(Headers: ON) (Headers: OFF)
*ESE0
<NR1> <NR1>
Example
Transmission
Response
*ESE0?
*ESE0 34 34
Syntax
*ESE1
<NR1>
<NR1> = 0 to 255
Example
Transmission
*ESE1 74
Bits 6 and 3 of ESER1 are set to 74.
64+8=74
Function
Sets the mask pattern of the event status
enable register 0 (ESER0) to a value (0
to 255).
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
SE ST PE FE SP IE CE
Note
When the power is turned on, and when a
reset has taken place upon key input, the
data is reinitialized to 0.
Error
Execution error / If the setting data is out
of the range.
Function
The contents of the event status enable
register 0 (ESER0) as set by the
*
ESE0
command are returned as a NR1 value (0
to 255).
Error
Query error / If the response message is
longer than 2000 bytes
Function
Sets the mask pattern of the event status
enable register 1 (ESER1) to a value (0
to 255).
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
O6 O5 O4 O3 O2 O1 OF
Note
When the power is turned on, and when a
reset has taken place upon key input, the
data is reinitialized to 0.
Error
Execution error / If the setting data is out
of the range.
*ESE0
Sets the event status enable register 0.
*ESE0?
Queries the standard event status enable register 0 (SESER0).
*ESE1
Sets the event status enable register 1.