Hioki Power HiTester 3193, Instruction Manual

Page: 205 / 310

187
────────────────────────────────────────────────────
:SCALe [channel no.] :SC?
────────────────────────────────────────────────────
Syntax
:SCALe:SC
[1 - 6]
?
Response
syntax
:SCALE:SC
[1-6] <NR2>
Example
Transmission
Response
:SCALE:SC1?
:SCALE:SC1 1000
Syntax
:SCALe
[1 - 6]
?
Response
syntax
:SCALE
[1 - 6]
:CONTROL
<ON/OFF>,
<ON/OFF>,<ON/OFF>
;PT
<NR2>
;CT
<NR2>
;SC
<NR2>
Example
Transmission
Response
:SCALE1?
:SCALE1:CONTROL ON,ON,ON;PT
1000:CT 1000;SC 1000
Syntax
:STARt
Example
:START
Starts operations for each controls.
Function
Queries the current setting of SC ratio for
the specified input unit.
Function
Queries the scaling settings for each input
units.
Function
All of the various timer settings start at
the beginning of a cycle. The operation is
the same as pressing the START/STOP
key on the panel.
Synchronized control
Integration start
Time averaging start
FD, printer start
Note
After executing this command,
integration is always operative. For this
reason, the various settings can no longer
be changed, and auto range settings
become fixed at their current setting.
To change the range, execute the
:INTEGrate:RESET command after the
:STOP command is executed.
If after repeated start/stop operations the
total time reaches 10,000 hours, an
execution error results.
To ensure that the total time does not
exceed 10,000 hours, follow the :STOP
command with an :INTEGrat:RESET
command.
:SCALe [
channel no.
] :SC?
Queries the SC ratio.
:SCALe [
channel no.
] ?
Queries the settings of the scaling function.
:STARt
Starts all of the various timer settings at the beginning of a cycle.