Hioki Power HiTester 3193, Instruction Manual

Page: 105 / 310

87
────────────────────────────────────────────────────
9.2 Internal Circuit for Analog, Monitor, D/A Outputs
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Output type Output rate
Analog Output 5Vf.s. (1kV range: 3.333Vf.s.)
Monitor Output １Vf.s. (1kV range: 0.667Vf.s.)
D/A Output 5Vf.s.
CAUTION
To avoid damage to the unit, do not short the output terminal and do
not input voltage to the output terminal.
Output terminal
Analog GND
NOTE
9.2 Internal Circuit for Analog, Monitor, D/A Outputs
The output rates are shown below.
For the details, please see the specifications of the output unit.
･
The output impedance is approximately 100
Ω
. When connecting to a
recorder, DMM, or similar, use a unit with a high input impedance (at least
1 M
Ω
).
･
See the Specifications of each input units for the analog output and monitor
output.
･
For the specification of the D/A output, see chapter 10, "D/A Output."