Hioki Power HiTester 3193, Instruction Manual

Page: 113 / 310

95
────────────────────────────────────────────────────
11.1 Overview
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CAUTION
・ Do not use 2DD floppy disk.
・ Do not remove the floppy disk while the floppy disk unit is operating
(the LED on the floppy disk unit is on). In the worst case, the floppy
disk may be corrupted.
・ Powering off the unit while the LED on the floppy disk drive is lit may
corrupt the data on the disk.
・ During automatic saving, do not remove the disk except when it is full.
There is no problem as long as the LED is not lit.
・ If a floppy disk is inserted upside down, backwards, or in the wrong
direction, the floppy disk or the unit may suffer damage.
Contents of files Extensions
Data file name (auto setting) ********.CSV (AUTO***.CSV)
Unit setting file name (auto setting) ********.SET (AUTO***.SET)
Screen copy file name (auto setting) ********.BMP (AUTO***.BMP)
Chapter 11
Using the Floppy Disk Drive
(only 3193)
11.1 Overview
This chapter is on the use of the 3.5 inch floppy disk drive (hereinafter,
FDD) installed in the HIOKI 3193.
There is no FDD in the HIOKI 3193-10.
Supported media
3.5-inch (2HD) MS-DOS format
1.2 MB (NEC PC-9801) / 1.44 MB (IBM-PC/AT)
Function
･ Saving measurement values
･
Saving the 3193 settings
･
Loading/resetting 3193 settings
･
Formatting a floppy disk (1.2 MB/1.44 MB)
･
Automatic saving using time settings
･
Starting saving by external control
･
Update (upgrade)
File extensions
When this unit saves measurement data, it automatically appends a three-
character extension to the file name. When the data is analyzed on a
computer, the extension identifies the type of data.