Hioki Power HiTester 3193, Instruction Manual

Page: 119 / 310

101
────────────────────────────────────────────────────
11.7 Setting the Measurement Items for Saving
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
F1
F1 F2 F3 F4 F5
OUTPUT ITEM
FREQ/OUTPUT
NOTE
11.7 Setting the Measurement Items for Saving
114-1.tif CHANGE, 114-2.tif
1. Press the STATUS key and then use the PAGE key to
display the "
FREQ/OUTPUT
" page.
2. Using the
CURSOR
keys, move the cursor to the
"
OUTPUT ITEM
" item.
3. Press the
F1
(
SELECT
) key , to display the screen
for output item selection. In this screen, "ON"
indicates the selected items, and items not marked
are not saved.
4. Move the cursor to the item to be saved.
5. Press the
F2
(
ON)
key to make a setting.
To delete the item which has been set, press
F1
(
OFF)
key.
6. Pressing the
F3
(
LINE)
key sets the items on the
specified line to on or off.
7. When the settings are completed, press the
F5
(
RETURN)
key.
･
The items to be saved is same as the printer.
･
For settings of the measurement data in harmonic/flicker analysis function,
see Instruction manual for them.
･
"OUTPUT COUNT" shows the number of data present for output. The
number "+3" refers to the date, time or interval time. This number always
accompanies these items.
･
Each item of a channel corresponds to an efficiency or 9603 data as shown
below.
EFFI/CH1: efficiency
η
1
EFFI/CH2: efficiency
η
2
EFFI/CH3: efficiency
η
3
EXT /CH1: 9603 CHA
EXT /CH2: 9603 CHB
EXT /CH3: 9603 PM (This cannot be set unless the motor power is
calculated.
）