Hioki Power HiTester 3193, Instruction Manual

Page: 22 / 310

4
────────────────────────────────────────────────────
1.2 Features
────────────────────────────────────────────────────
(16) FDD installed (only 3193)
The built-in floppy disk drive facilitates data saving when required, and
automatic saving at preset times.
It is also possible to save the unit settings and reload them to restore the
previous state. Upgrades of the unit are also supported.
(No FDD in the HIOKI 3193-10)
(17) Eight-channel D/A output fitted as standard
These output specified items, with an output of
±
5 V corresponding to the
full scale range.
(18) Efficiency calculation function fitted as standard
This provides three efficiency calculations from measured power values.
(19) Rapid response analog outputs fitted as standard
These outputs provide 5 V full-scale analogs of the voltage, current, and
active power ranges. (Excluding 1000 V range)
When the response is set to FAST, these have a 100 ms response time.
(20) Waveform outputs fitted as standard
These outputs provide 1 V full-scale waveform outputs corresponding to the
voltage and current ranges, allowing waveform monitoring with a recorder or
oscilloscope.
(21) Built-in printer (option)
This provides a printout of the measurement data and screen displays.
(22) Choice of display language
The display language can be selected as English or Japanese.
(23) GP-IB/RS-232C fitted as standard