Hioki Power HiTester 3193, Instruction Manual

Page: 152 / 310

134
────────────────────────────────────────────────────
*ESE [ channel no. ]
────────────────────────────────────────────────────
Syntax
*ESE
[11 - 16 / 21 - 26] <NR1>
11 - 16: when using the input unit for
channel 1 to 6
21 - 26: when using the 9605 for
channel 1 to 6
<NR1> = 0 to 255
Syntax
*ESE
[11-16 / 21-26]
?
11 - 16: when using the input unit for
channel 1 to 6
21 - 26: when using the 9605 for
channel 1 to 6
Syntax
*ESEF
<NR1>
<NR1> = 0 to 255
Example
Transmission
*ESEF 2
Bit 1 of ESERF is set.
Function
Sets the mask pattern of the event status
enable registers 11 to 16, 21 to 26
(ESER11 to 16, 21 to 26) of specified
channel.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
OA OV HW HA HV
Note
When the power is turned on, and when a
reset has taken place upon key input, the
data is reinitialized to 0.
Error
Execution error / If the setting data is out
of the range.
Function
The contents of the ESER 11 to 16, 21 to
26 set by the ESE [channel no.]
command are returned as a NR1 value (0
to 255).
Function
Sets the mask pattern of the event status
enable register F (ESERF) to a value (0
to 255).
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
OC OB OA
Note
When the power is turned on, and when a
reset has taken place upon key input, the
data is reinitialized to 0.
Error
Execution error / If the setting data is out
of the range.
*ESE [
channel no.
]
Sets the standard event status enable registers 11 to 16, 21 to 26.
*ESE [
channel no.
]?
Queries the standard event status enable registers 11 to 16, 21 to 26.
*ESEF
Sets the event status enable register F.