Hioki Power HiTester 3193, Instruction Manual

Page: 261 / 310

243
────────────────────────────────────────────────────
15.3 Specifications (using with the HIOKI 3193)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Voltage （ U ） Current （ I ） Active power （ P ）
Input type
Resistor voltage divider
+ isolation amplifier,
for isolated input Isolated input, using CT
method
――――
Measurement type
Analog processing:
･ True effective value
measurement
･
Mean value
rectification effective
value measurement
Analog processing:
･ True effective value
measurement
･
Mean value rectification
effective value
measurement
Analog processing:
Active power
measurement
Input resistance
2 M
Ω±
100 k
Ω
(
±
5
％
) 1
ｍΩ
or less
――――
Measurement range
6.0000/15.000/30.000
60.000/150.00/300.00
600.00 V/1.0000 kV 200.00/500.00 mA
1.0000/2.0000/5.0000
10.000/20.000/50.000 A Depending on
combination of voltage
and current values.
Effective input range
5% to 110% (up to 100% for 1 kV range) or within the range accuracy
assurance range for the signal frequency specified elsewhere
（ display range 0.1% to 130%(200 mA range), 0.2% to 130%(Others),
0.3% to 130%(1000V range)
）
Maximum input voltage
Maximum input current
（55 Hz）
1000 Vrms
1500 Vpeak value 65 Arms
100 Apeak max.
――――
Crest factor
(Measurement range × 6)
/measurement value or
Maximum input
voltage peak value/
measurement value
(Measurement range × 6)
/measurement value or
Maximum input current
peak value/ measurement
value
――――
Accuracy
（Note 1）
23℃±5℃
(73° F±9° F)
80%RH max.
Power
factor=1
1 hour warm
-up
Input sine
wave
Voltage to
earth 0 V
Guaranteed
accuracy
period: six
months
5-10 Hz
± 2.5%f.s ± 2.5%f.s ± 2.5%f.s
10 - 20 Hz
± 1.0%f.s ± 1.0%f.s ± 1.0%f.s
20 - 45 Hz
± 0.1% rdg. ± 0.2%f.s. ± 0.1% rdg. ± 0.2%f.s. ± 0.1% rdg. ± 0.2%f.s.
45 - 66 Hz
±
0.1% rdg.
±
0.1%f.s.
±
0.1% rdg.
±
0.1%f.s.
±
0.1% rdg.
±
0.1%f.s.
66 Hz
- 5 kHz
±
0.1% rdg.
±
0.2%f.s.
±
0.1% rdg.
±
0.2%f.s.
±
0.1% rdg.
±
0.2%f.s.
5 k -
10 kHz
±
0.2% rdg.
±
0.4%f.s
±
0.2% rdg.
±
0.4%f.s.
±
0.2% rdg.
±
0.4%f.s.
10 k -
20 kHz
± 1.0%f.s. ± 1.0%f.s. ± 1.0%f.s.
20 k -
50 kHz
±
2.5%f.s.
±
2.5%f.s.
±
2.5%f.s.
50 k -
100 kHz
±
10.0%f.s.
±
10.0%f.s.
±
10.0%f.s.
Note 1: There are limited ranges for the levels at which the accuracy is specified, depending on the input
signal frequency.
Note 2: The accuracy specified range varies depending on switching response, coupling mode, and LPF.
See each column on the next page.
15.3 Specifications (using with the HIOKI 3193)