Hioki Power HiTester 3193, Instruction Manual

Page: 168 / 310

150
────────────────────────────────────────────────────
:DATAout:ITEM?
────────────────────────────────────────────────────
Syntax
:DATAout:ITEM?
Response
syntax
:DATAOUT:ITEM:
NORMAL
<0-63 (8 items)>
;
SUM
<0-63 (7 items)>
;
INTEGRATE
<0-63 (10 items)>
;
FREQUENCY
<0-7>
;
LOADFACTOR
<0-64 (2 items)>
;
EFFICIENCY
<0-7>
;
EXTRNALIN
<0-7>
Example
:DATAOUT:ITEM?
:DATAOUT:ITEM:
NORMAL 7,7,0,0,0,0,0,0;
SUM 8,8,8,8,8,8,8;
INTEGRATE 0,0,7,0,0,0,8,8,8,1;
FREQUENCY 1;LOADFACTOR 0,8;
EFFICIENCY 1;EXTRNALIN 7
Syntax
:DATAout:ITEM:ALLClear
Example
:DATAOUT:ITEM:ALLCLEAR
Clears all set output items
Syntax
:DATAout:ITEM:EFFiciency
<NR1>
<NR1> = 0 - 7
Example
:DATAOUT:ITEM:EFFICIENCY 1
As the default output items to the
floppy disk drive or printer for load
factor measurement, specify EFF1.
Function
Queries the items to be output to the
floppy disk drive or printer.
Function
Clears all items set by default for output
to the floppy disk drive or printer.
Note
If the :DATAout:FD and
:DATAout:PRINter commands is
executed, an execution error occurs.
Function
Sets the output item for the efficiency
measurement to FDD or printer.
The item is set as shown below by setting
bits to 1 or 0, to specify a single
numerical value.
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
- - - - - EFF3 EFF2 EFF1
Error
Execution error / If the setting data is out
of the range.
:DATAout:ITEM?
Queries the items to be output to the floppy disk drive or printer.
:DATAout:ITEM:ALLClear
Clears all output items.
:DATAout:ITEM:EFFiciency
Sets the output item of the efficiency measurement.