Hioki Power HiTester 3193, Instruction Manual

Page: 111 / 310

93
────────────────────────────────────────────────────
10.3 Output Rate
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Selecting items for output Full scale
Voltage value, current value for each channel,
SUM value of voltage and current,
9603 External signal unit
（U1 - U6, I1 - I6, U12, U34, U56, U123, U456, I12,
I34, I56, I123, I456, Va, Vb） Measurement range
Effective power, reactive power, apparent power for
each channel
（P1 - P6, Q1 - Q6, S1 - S6） (voltage range)×(current range)
For example, when measuring in the 300 V range and 10
A range, 3 kW corresponds to full scale.
Display value: -3 kW - 0 - +3 kW
D/A output value: -5 V - 0 - +5 V
Effective power, reactive power, SUM value of
apparent power during measuring 1P3W, 3P3W,
（P12, P34, P56, Q12, Q34, Q56, S12, S34, S56）
Effective power, reactive power, SUM value of
apparent power during measuring 3V3A
（P123, P456, Q123, Q456, S123, S456） (voltage range)×(current range)×2
For example, when measuring in the 300 V range and 10
A range, 6 kW corresponds to full scale.
Display value: -6 kW - 0 - +6 kW
D/A output value: -5 V - 0 - +5 V
Effective power, reactive power, SUM value of
apparent power during measuring 3P4W
（Ｐ123, Ｐ456, Ｑ123, Ｑ456, Ｓ123, Ｓ456） (voltage range)×(current range)×3
For example, when measuring in the 300 V range and 10
A range, 9 kW corresponds to full scale.
Display value: -9 kW - 0 - +9 kW
D/A output value: -5 V - 0 - +5 V
Power factor (λ) Display value: -1 - 0 - +1
D/A output value: -5 V - 0 - +5 V
Phase angle (φ) Display value: -180
。
- 0 - +180
。
D/A output value: -5 V - 0 - +5 V
Efficiency (η) Display value: 0 - 100%
D/A output value: 0 - 5 V
Current integrate value (Ih) (current range)×(integrated time)
For example, when integrating in the 10 A range for 1
hours, 10 Ah corresponds to full scale.
Display value: -10 Ah - 0 - +10 Ah
D/A output value: -5 V - 0 - +5 V
Effective power integrate for 1P2W (WP) (voltage range)×(current range)×(integrated time)
For example, when integrating in the 300 V range and 10
A range for 1 hours, 3 kWh corresponds to full scale.
Display value: -3 kW - 0 - +3 kW
D/A output value: -5 V - 0 - +5 V
Effective power integrate for 1P3W, 3P3W, 3V3A
(WP) (voltage range)×(current range)×(integrated time)×2
For example, when integrating in the 300 V range and 10
A range for 1 hours, 6 kWh corresponds to full scale.
Display value: -6 kW - 0 - +6 kW
D/A output value: -5 V - 0 - +5 V
Effective power integrate for 3P4W (WP) (voltage range)×(current range)×(integrated time)×3
For example, when integrating in the 300 V range and 10
A range for 1 hours, 9 kWh corresponds to full scale.
Display value: -9 kW - 0 - +9 kW
D/A output value: -5 V - 0 - +5 V
Frequency (f) Frequency range is full scale.
NOTE
10.3 Output Rate
The D/A outputs are
±
5 V DC corresponding to full scale, where the full
scale values are as shown in the following table.
･
For integration, the integration time is the time interval set for the timer time
or the real-time control time.
･
For manual integration, the integration time is output as 10,000 hours.