Hioki Power HiTester 3193, Instruction Manual

Page: 27 / 310

9
────────────────────────────────────────────────────
2.2 Names and Configuration of Screen
────────────────────────────────────────────────────
2.2.2 MEAS Screen (Measurement Screen)
#201.tif
Measurement Screen
Use the PAGE keys
Use the Function keys
① ② ③ ④
In 1P2W mode
#202.tif
In 1P3W, 3P3W mode
#203.tif
This screen displays measurement results. The displays available depend on
the options installed.
Switch from one display to another using the
PAGE
key on the front panel. In
this case the second row of cursor positions from the top of the screen shows
the currently displayed page. Each item in this row is blank if the
corresponding option is not installed. The third row on the screen shows the
settings for the currently displayed channel.
① Screen for each channel (channels 1 to 6) [
1ch
to
6ch
]
・
This is the screen when the cursor position is on 1ch (channel 1) to 6ch
(channel 6). This corresponds to the installation of the 9600, 9601, and 9602
options.
・ For multi-channel combinations, of single-phase three-wire (1P3W) and
above, the measurement values are displayed combined on a single screen. In
this case, the cursor also appears on the corresponding channel numbers
together.