Installing the Balanced Body
®
Konnector
™
The Konnector is compatible with Balanced Body Studio
Reformers with wooden risers and removable shoulder rests
ONLY. If you aren’t sure whether this system will work with your
equipment, please contact Balanced Body at 1-800-PILATES (US
and Canada), or +1-916-388-2838 (all other countries).
To view the installation podcast, please visit
www.pilates.com/instructions
TOOLS REQUIRED (NOT INCLUDED):
»
7/16” wrench or socket (recommended)
PARTS LIST (INCLUDED):
ITEM
PART NO.
QTY
Konnector Rope
210-054
1
Konnector Riser Assembly
707-257
2
2-3/4” Allen bolts
GEN8032
4
1/4” Flat Washer
GEN9204
6
1/4” Fender Washer
GEN9952
2
Tri-Loops (Grey)
210-053
2
Tri-Loops (Black) with pulleys
210-052
2
Hair Guard
616-187
1
1/4-20x3/8” Button head screw
GEN9943
4
1/4-20 Nylock nut
GEN9021
4
5/32” Allen wrench
GEN9282
1
3/16” Allen wrench
GEN9280
1
1/4-20x1-1/2” Flat head screw
GEN7313
2
Twist Lock™ Shoulder Post
616-400
2
Twist Lock Flanged Cap
616-401
2
Left Pulley Bracket Assembly
N/A
1
Right Pulley Bracket Assembly
N/A
1
Bolt/Washer/Nut Assembly
N/A
2
WARNING: Using the existing shoulder posts with a Konnector
system can cause the loops to fall off the posts during use
which may cause injury.
REMOVE POST AND SHOULDER BRACKETS
1. Unthread each post from the shoulder rest bracket by hand
and completely remove them from the shoulder rest bracket.
You will no longer need them. Remove the shoulder rest
bracket from the carriage. Repeat on the other side.
2. Using the provided Allen wrench, remove the two flat head
screws as shown in Figure A. Replace these two removed
screws with the two flat head screws (1/4”-20 x 1-1/2” long)
provided.
WARNING: If you are only using some of the loops, the
unused loops MUST be stored on the flanged shoulder
posts.
1
2
3
4
Figure A
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | [email protected]
400-317 | 04.04.17
