Dell C7765DN, User Manual

Page: 358 / 829

15 Tools
358
Connectivity & Network Setup
In [Connectivity & Network Setup], you can configure settings related to the Connectivity
& Network feature.
For information on Connectivity and Network Settings, refer to "Printer Environment Settings"
(P.469) or "E-mail Environment Settings" (P.487).
If you use Dell Printer Configuration Web Tool, more detailed settings are possible. For more
information, refer to "Dell Printer Configuration Web Tool Settings" (P.461).
The following shows the reference section for each setting.
Port Settings .............................................................................................................................358
Protocol Settings ......................................................................................................................363
Machine's E-mail Address/Host Name....................................................................................366
Proxy Server Settings ...............................................................................................................367
Outgoing/Incoming E-mail Settings .......................................................................................368
Remote Authentication/Directory Service..............................................................................369
Security Settings ......................................................................................................................374
Other Settings ..........................................................................................................................379
1
On the [Tools] screen, select [System Settings] > [Connectivity & Network Setup].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.296).
2
Select an item to set or change.
Port Settings
Set the interface of the machine connected to a client. In [Port Settings], you can configure
the following settings.
Note • For LPD, Port9100, and HTTP-SSL/TLS, do not use a number that is the same as a port number of
another port.
For a port that uses HTTP (IPP, Internet Service (HTTP), UPnP Discovery, SOAP, WebDAV, and Web
Services on Devices (WSD)), do not use a number that is the same as a port number of LPD, Port9100,
and HTTP-SSL/TLS.
Furthermore, if any of the above are set to one of the port numbers indicated below, operation may no
longer be performed properly depending on the setting conditions of the port:
25, 139, 427, 445, 631, 15000
For information on HTTP-SSL/TLS port, refer to "HTTP - SSL/TLS Port Number" (P.374).
USB
Port Status
Select [Enabled] to use a USB interface.
Print Mode
Select the printer language use on the machine. Selecting [Auto] enables the machine to
automatically determine and use the most suitable language to print data received from the
host device.
PJL
PJL (Printer Job Language) is a job control language and a PJL command is data prepended
to the top of the print jobs. Usually select [Enabled].