Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Section 7: SCPI command reference
077114601 / March 2019
7-163
:SYSTem:BEEPer:ERRor[:STATe]
This command allows you to turn the beeper on or off.
Type
Affected by
Where saved
Default value
Command and query
Recall settings
Instrument reset
Power cycle
Save settings
1 (ON)
Usage
:SYSTem:BEEPer:ERRor[:STATe] <state>
:SYSTem:BEEPer:ERRor[:STATe]?
<state>
Disable the beeper:
OFF
or
0
Enable the beeper:
ON
or
1
Details
This command enables or disables the beeper for error messages. When enabled, a beep signals
that an error has happened.
Example
:SYSTem:BEEPer:ERRor ON
Enable the error beeper.
Also see
(on page 7-170)
:SYSTem:COMMunication:ABORt
This command causes the remote control to transfer to the present interface.
Type
Affected by
Where saved
Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
SYSTem:COMMunication:ABORt
Details
The instrument supports the following interfaces:
USB
LAN
GPIB
LXI
Only one interface may be connected at a time. When one interface is active, all the others are
blocked.
When this command is sent by one of the interfaces, the present active interface is blocked, and the
interface that sends
SYST:COMM:ABOR
becomes active.