background image

     

PDS-30 Instruction Guide 

Digital Power Supply Unit for LED Lights

 

 

Safety Precautions

       

*Please read this instruction guide before using the product. 

 

Thank you for purchasing PDS Power Supply for LED lights.    Please read this Instruction 
Guide carefully before using the product, and follow its instructions to ensure safe 
operation.    We also recommend keeping this Instruction Guide together with the product 
for future reference. 
Be sure to pay special attention to the information marked with "      Danger," "      Warning," 
or "   Caution".  The information is provided to prevent injury, electric shock and other 
damages. 
 
Indication symbols 
This instruction guide contains following symbols which indicate precautions in order to 
prevent injury or property damages.    To ensure safe operations, please adhere to the 
information provided in this instruction guide. 

 

 

Danger 

Indicates an imminently hazardous situation which, if not avoided, will result 
in death or serious injury, as well as severe property damage. 

 

Warning  Indicates incorrect usage may result in serious injury or death. 

 

Caution  Indicates incorrect usage may result in injury or equipment damage. 

 
Examples of indication symbols 

 

Symbols indicate caution (also including danger and warning).     

Specific examples are shown in the diagram (A diagram on the left indicates 
electric shock warning). 

 

 Symbols indicate prohibition.     

Specific examples are shown in the diagram. (A diagram on the left indicates 
prohibition to disassemble)    

 

 Symbols indicate instruction for specific actions.     

Specific examples are shown in the diagram. (A diagram on the left indicates 
unplugging a power cord) 

 
 
 
 
 
 
 

Содержание PDS-30

























Отзывы: