CCS PDS-30, Инструкция по эксплуатации

Страница: 17 / 24

T: Trigger Output Delay Setting Command
Name Trigger output delay setting command
Header code T
Function It sets the delay time of external output timing signal for strobe light.
@ 99 T 99999 R/W FF CR LF
Command
Header Channel
Output
delay time
Write
flag
Checks
um
Delimiter
Response
@ 99 O FF CR LF
OK
command
Header Channel Checksum Delimiter
@ 99 N 9 FF CR LF
NG
command
Header Channel Error No.
Checks
um
Delimiter
The output delay time may be set from 0
µ
s to 10,000
µ
s.
Although it can be set increment of 1
µ
s as setting, it will actually be rounded in approximately 20
µ
s
increments at 300
µ
s or lower and 100
µ
s increments at 320
µ
s or higher.
D: Strobe Light Delay Setting Command
Name Strobe light delay setting command
Header code D
Function It sets the delay time for strobe light.
@ 99 D 99999 R/W FF CR LF
Command
Header Channel
Strobe light
delay time
Write
flag
Check
sum
Delimiter
Response
@ 99 O FF CR LF
OK
command
Header Channel Checksum Delimiter
@ 99 N 9 FF CR LF
NG
command
Header Channel Error No.
Checks
um
Delimiter
Strobe light delay time may be set from 0
µ
s to 10,000
µ
s.
Although it can be set increment of 1
µ
s as setting, it will actually be rounded as shown at the
“2-5 Light Delay Time”.
(The delay time can not be set with 1
µ
s step)